Hermiston, Oregon • 1-800-367-1847 • sales@superhaytoday.com

Advanced Hay Equipment Bale Stackers Hay Conditioner Hay Rakes Irrigation Wheels Conditioner Roll Recovery Used Hay Equipment Videos Feature Testimonials Brochures About Us Contact Us Circle C Friends

Hay Equipment for the Advanced Farmer

American Eagle Big Bale Stacker

Minimum Truck Requirements

New Style Bed with Clamshell Type Rear Forks

BALE STACKER NUTS & BOLTS

These specifications reflect the minimum truck that will handle big bales efficiently.

Updated September 2, 2003. If you need detailed specs, call Mel at 1-800-367-1847 or 541-567-2992.


INTERNATIONAL MODEL 8100 TRUCK. 1988 OR NEWER

300 HORSEPOWER MINIMUM.

This truck is a conventional snub nose cab with a set-back front axle.


TANDEM AXLE (TWIN SCREW) WITH INTERLOCK.


GROSS VEHICLE WEIGHT RATING

44,000 GVW MINIMUM  - 10,000 front - 34,000 rear


EATON FULLER 9 SPEED MANUAL TRANSMISSION

Perhaps you prefer ALLISON AUTOMATIC TRANSMISSION


Under 250 h.p. MT653 (5 speed) over 250 h.p. HT740DRD (4 speed) or HT750DRD or CLT750 (5 speed)

DRD means deep reduction diesel, with a low first gear.


RECOMMENDED FINAL DRIVE GEAR RATIO: Top speed of 70 m.p.h. or less


CABOVER TRUCKS

THE BELL HOUSING CANNOT BE EXPOSED ABOVE THE TOP OF THE TRUCK FRAME.

THE TOP OF THE TRANSMISSION MUST BE 4" BELOW THE TOP OF THE FRAME.


WHEEL BASE

261 INCHES OF USABLE FRAME FROM BACK OF CAB TO END OF FRAME.

39 1/2 INCHES OF THE FRAME MUST BE BEHIND THE CENTERLINE OF THE REAR AXLE.

DEFINITION OF USABLE FRAME: No chassis components are above the frame.

On a 1997 International model 8100 truck, this is approximately 256" wheelbase

 

FRAME RAIL SIZE

MINIMUM 10" x 3 ½" x 5/16" 41" OR TALLER AT REAR AXLE


TIRES: 11 R 22.5


AIR CONDITIONING to keep the cab and control box clean.


EXHAUST MUST BE UNDERNEATH, NOT A STACK

The exhaust stack will interfere with the arm, and is also a fire hazard.


LIVE POWER TAKE OFF FOR THE HYDRAULIC PUMP

This may require modification of the radiator unless other provisions are made.

Contact Us